Flexible Remote Control
- Two Remote Volume Control Terminals
- Assignable to any input or output
channel
- Control with 10k ohm linear potentiometer, 0-10 VDC or optional
ZM-9001/ZM-9002 remote panels
- Assign remote volume control to background music (Priority 8)
inputs without affecting paging input volume
- Four Control Inputs
(expandable to twelve with C-001T
module) — programmable to activate Memory, Volume Up/Down, Mute,
Power On/Off, Emergency Mute or Synch On/Off these functions can be
used with the ZM-9003 optional remote control panel
- Four Control Outputs
(expandable to twelve with C-001T
module) — programmable to activate external relays synchronized with
Memory, Channel On/Off and Power On/Off
- RS-232 Port
- Control protocol available for external devices
(see protocol for controllable parameters)
- AMX and Crestron control modules available
Accessories
|
 |
ZM-9001
Remote Panel
- Six programmable push buttons to activate Scene memory
recall, Event activation or volume up/down (one input or
output channel)
- Wiring: one shielded conductor to chassis Remote Volume
terminals
- Max. loop resistance: 100 ohms (3000 ft. 22AWG)
- Fits one gang electrical box
- Maximum two ZM-9001/ZM-9002 per chassis
Note: Use of the
ZM-9001 requires Firmware Version 2.0 or higher and may
require a hardware modification at the TOA Repair Center.
9000 Series Units with Firmware Version 1.xx and/or without
a modification sticker 06F01004R will require modification.
Please contact TOA Technical Services - Product Support
Group at (800) 733-4748 Option 2 for issuance of a return
for Service Authorization form.
(9000 Series units with Serial
Numbers 06F or higher have already been factory modified.)
CAD
Specification (DWG, 119kb)
Installation Manual
(PDF, 222kb)
|
 |
ZM-9002
Remote Panel
- Four programmable push buttons to activate Scene memory recall,
Event activation or volume up/down (one input or output channel)
- Volume control knob (globally assignable to one input or output
channel)
- Wiring: one shielded conductor to chassis Remote Volume terminals
- Max. loop resistance: 100 ohms (3000 ft. 22AWG)
- Fits one gang electrical box
- Maximum two ZM-9001/ZM-9002 per chassis
Note: Use of the ZM-9002 requires
Firmware Version 2.0 or higher and may require a hardware
modification at the TOA Repair Center. 9000 Series Units with
Firmware Version 1.xx and/or without a modification sticker
06F01004R will require modification. Please contact TOA Technical
Services - Product Support Group at (800) 733-4748 Option 2 for
issuance of a return for Service Authorization form.
(9000 Series units with Serial
Numbers 06F or higher have already been factory modified.)
CAD Specification
(DWG, 118kb)
Installation Manual
(PDF, 222kb)
|
 |
ZM-9003
Remote Panel
- Four interlocking selection buttons and two
momentary buttons
- Max. loop resistance: 250 ohms per line
- Fits two gang electrical box
- Removable Terminal Block
- Maximum two ZM-9003 per chassis
- Use of the ZM-9003 requires the installation of
(1) C-001T Control IN/OUT Expansion Module.
CAD
Specification (DWG, 130kb)
Installation Manual (PDF, 230kb)
|
 |
AN-9001
Ambient Noise Sensing Microphone
-
Ceiling or
wall-mount condenser microphone
-
Fits one gang
electrical box
-
Use with
AN-001T module or DP-L2 processor
CAD Specification
(DWG, 90kb)
Installation Manual (PDF,
257kb)
|
 |
SS-9001
Speaker Selector
-
Switch up to four speaker lines on one amplifier output
-
Two amplifier inputs for Paging/BGM applications
-
Triggered by ZP-001T module control outputs
-
Wall-mount bracket included
-
Requires optional 24VDC power supply, model AD-246
CAD Specification
(DWG, 119kb)
Installation Manual (PDF,
271kb)
|
|
