Flexible Remote Control
Four Control
Inputs—programmable to activate Paging/Scene Memory, Volume Up/Down
(Input or Output), Mute (Input or Output), Power On/Off, Emergency Mute,
Paging Prohibit (expandable to twelve with C-001T module). Works with optional ZM-9003 or
custom contact panel
Four Control
Outputs (open collector) programmable to activate external relays
(expandable to twelve with C-001T module) synchronized with Paging/Scene Memory, Channel
On/Off (Input or Output) and Power On/Off.
RS-485 Remote
Controllers:
- ZM-9011 Single-gang assignable 4-button
controller with LED status indicators
- ZM-9012 Single-gang assignable Volume Controller with LED level
indicators
- ZM-9013 Dual-Gang assignable 8-button Controller with LED status
indicators
- ZM-9014 Dual-gang assignable 4-button controller with LED status
indicators, plus assignable Volume Controller with LED level indicators
RS-232 serial
port :
- Allows upload & download of programming templates and firmware
upgrades as
well as real-time control of various parameters.
- Control protocol available
- AMX and Crestron control modules available
Accessories
|
 |
ZM-9001
Remote Panel
- Six programmable push buttons to activate Scene memory
recall, Event activation or volume up/down (one input or
output channel)
- Wiring: one shielded conductor to chassis Remote Volume
terminals
- Max. loop resistance: 100 ohms (3000 ft. 22AWG)
- Fits one gang electrical box
- Maximum two ZM-9001/ZM-9002 per chassis
CAD
Specification (DWG, 119kb)
Installation Manual
(PDF, 222kb)
|
 |
ZM-9002
Remote Panel
- Four programmable push buttons to activate Scene memory recall,
Event activation or volume up/down (one input or output channel)
- Volume control knob (globally assignable to one input or output
channel)
- Wiring: one shielded conductor to chassis Remote Volume terminals
- Max. loop resistance: 100 ohms (3000 ft. 22AWG)
- Fits one gang electrical box
- Maximum two ZM-9001/ZM-9002 per chassis
CAD Specification
(DWG, 118kb)
Installation Manual
(PDF, 222kb)
|
 |
ZM-9003
Remote Panel
- Four interlocking selection buttons and two
momentary buttons
- Max. loop resistance: 250 ohms per line
- Fits two gang electrical box
- Removable Terminal Block
- Maximum two ZM-9003 per chassis
- Use of the ZM-9003 requires the installation of
(1) C-001T Control IN/OUT Expansion Module.
CAD
Specification (DWG, 130kb)
Installation Manual (PDF, 230kb)
|
 |
AN-9001
Ambient Noise Sensing Microphone
-
Ceiling or
wall-mount condenser microphone
-
Fits one gang
electrical box
-
Use with
AN-001T module or DP-L2 processor
CAD Specification
(DWG, 90kb)
Installation Manual (PDF,
257kb)
|
 |
NEW! ZM-9011
Assignable Remote Button Panel
Fits in standard single-gang
electrical box
Four assignable
buttons each with LED status indicator can control Xpoint settings
(on/off, select), paging activation, scene and relay activation
Assignable ID rotary
adjustment on box
Suppliedmatching decor plate
CAD Specification
(ZIP, 132kb) |
 |
NEW!
ZM-9012
Assignable Volume Controller
Rotary Encoder can be
assigned to control any input or output volume
Multiple input or
outputs may be “ganged” for Master volume control
Multi-segment LED
indicator provides visual volume level status
Supplied matching
decor plate
Removable terminal block
CAD Specification
(ZIP, 133kb)
|
 |
NEW!
ZM-9013
Assignable Remote Button Panel
Eight assignable
buttons each with LED status indicator can control Xpoint settings
(on/off, select), paging activation, scene and relay activation
Assignable ID rotary
adjustment on box
Supplied matching
decor plate
Removable terminal block
CAD Specification
(ZIP, 150kb)
|
 |
NEW!
ZM-9014
Assignable Remote Button Panel with Volume Control
Four assignable
buttons each with LED status indicator can control Xpoint settings
(on/off, select), paging activation, scene and relay activation
Assignable ID rotary
adjustment on box
Supplied matching
decor plate
Removable terminal block
CAD Specification
(ZIP, 154kb)
|
|
