Back to 9000 Series Home

GUI Software

Important Note: GUI Software and Firmware for the 9000 Series are not compatible with the 9000M2 Series units. To download 9000M2 Series software and firmware, please visit the 9000M2 Series Software page.

TOA recommends the use of a PC with a built-in RS-232 communication port using a straight through RS-232C cable. USB to RS-232 adapters are unreliable.
                                    

	Programming Software v2.11 Vista Only (ZIP, 9.5Mb) (Requires Firmware v3.13 or higher. .NET Framework update not included.) Programming Software v2.11 Vista & XP (ZIP, 36.5Mb) (Requires Firmware v3.13 or higher. .NET Framework update included.)
	MS Excel Programming Templates (ZIP, 1.5Mb)
	Programming Software Manual (PDF, 5.9Mb)
	Sample Application Files (ZIP, 230kb)

» Back to the top

Maintenance Software

Important Note: Do not use this software with 9000M2 Series units.

            Maintenance Software v2.10 (ZIP, 1.6MB)
       (Utility Software for Firmware Update, Download/Upload

         Settings, Status Monitoring and Virtual Control)

         Compatible with Windows XP and Vista

» Back to the top

Firmware Updates

Important Note: Do not use this firmware with 9000M2 Series units.

TOA recommends the use of a PC with a built-in RS-232 communication port using a straight through RS-232C cable. USB to RS-232 adapters are unreliable. (Firmware uploading using a USB to RS-232 adapter can result in the unit becoming locked in the "Update" mode and non-operational until the "Firmware Update" has been resumed and completed.)

           Firmware Update v3.50 (ZIP, 477Kb)

         This firmware version includes the new "Display Saver" mode.

• Requires use of new 9000 Series Maintenance Software, use the above Maintenance Software v2.10 to install.

• Note: Please read the PDF file named 9000 Series V3.50 Operation Instruction Addendum included in the ZIP.
   

» Back to the top

Firmware v1.x to v3.x Update Procedure

Only necessary for units with firmware earlier than V2.x
(This procedure keeps all previously programmed settings.)

Important Note: This procedure is used only to upgrade 9000 Series units with V1.xx firmware. Do not use this procedure with units having V2.xx or higher firmware. Do not use this procedure with 9000M2 Series units.

Note: If you do not need to retain settings programmed in v1.x firmware, please skip to Step #3 (All previously programmed settings will be erased.).

» Back to the top