 FEATURES
- Digital Signal Processor
for permanent installations.
Essential Audio Processing Tools
— Compressors, Limiters,
Noise Gates, Crossovers, Multi-Band Filtering, Parametric and Graphic
EQ, High/Low-Pass, All-Pass and Notch Filters, Horn EQ, High/Low
Shelving, Driver Alignment and Output Delays.
Modular Design —
2-Input/6-Output (2x6), easily expandable to 2x8, 2x10, 4x6, 4x8, or
6x6 using optional analog or digital I/O modules.
Built-In Matrix/Router
allows any combination of
input-to-output signal routing for zoning or room-combining
applications.
12 Filters on Each
Input and Each
Output
- any combination of parametric, all-pass,
notch, high/low pass/shelving and CD horn EQ.
Smaart and TEF Data Import Function
allows crossover
and equalization tuning of measured speaker system response files
exported from SIA Smaart and Goldline TEF software.
Unmatched TOA Quality and Reliability, successor to the
popular DACsys II Series
Superior Sound Quality
— 110 dB Dynamic Range
TOA CLEAR Conversion Technology (Pat. Pending) with precise
24-bit analog-to-digital conversion.
16 On-Board Memories for storage and recall of different
signal routing and parameter configurations.
Intuitive Control Software for
simultaneous programming and control of up to 30 DP-0206 units via
RS-232 or RS-485 serial communication.
Flexible Remote Control
with simple dry contact-closure activation of Memory Recall, Output
Volume Control and Output Muting via programmable control module
(optional).
Control Protocol Available
for interfacing with remote control devices such as
AMX or Crestron.
Effortless Connection From Computer to Unit
with automatic Com port, baud rate and Unit ID detection.
Comprehensive Security Features (hardware and software)
for front panel lock and password-protecting system settings.
Five Year Warranty
PRODUCTS
DP-0206 Digital Signal Processor
(2-Input / 6-Output)
DQ-A01 Dual Analog Input Module*
DQ-A02 Dual Analog Output Module*
DQ-D01 Dual Digital (AES/EBU) Input/Output Module
(switch-selectable)*
DQ-C01 Remote Control Module
(Memory/Volume/Mute)
*Two I/O expansion slots allow any combination of analog or digital
I/O modules.
EXPANDABLE I/O
Using optional modules, the 2-input/6-output DP-0206 can be easily
expanded allowing you to specify the correct number of inputs and
outputs for each application.
|
Inputs |
Outputs |
DQ-A01
Two Input Module* |
DQ-A02
Two Output Module* |
|
2 |
6 |
- |
- |
|
2 |
8 |
- |
1 |
|
2 |
10 |
- |
2 |
|
4 |
6 |
1 |
- |
|
4 |
8 |
1 |
1 |
|
6 |
6 |
2 |
- |
*Substitute the DQ-D01 Dual Digital Input/Output Module
(AES/EBU) for the DQ-A01 or the DQ-A02 to provide two digital input
channels or two digital output channels (switch-selectable).
OVERVIEW
THE DP-0206
MODULAR DIGITAL SIGNAL PROCESSOR is TOA's third generation of
industrial-grade, high-quality digital signal processors. Beginning in
1988 with the groundbreaking introduction of SAORI,
followed by the popular DACsys II Series in 1994, TOA was
the first manufacturer to introduce the benefits of DSP to the
professional audio community. Already recognized for superior sound
quality and unmatched reliability, TOA continues to improve and refine
the application of DSP for sound systems with the new DP-0206's
CLEAR Conversion analog-to-digital technology
(Pat. Pending). The DP-0206 is an ideal, cost-effective solution for
small and large-scale permanent installation applications including
auditoriums, convention centers, educational facilities, houses of
worship, performing arts centers, sports facilities and theaters.
 The
unique, modular design of the DP-0206 allows system designers to specify
the most cost-effective configuration for each project. The standard
2-input and 6-output (2x6) configuration is easily expandable to five
additional configurations—2x8, 2x10, 4x6, 4x8 and 6x6—via optional
analog or digital I/O modules. The DP-0206 combines all the
essential audio signal processing functions typically found between
mixers and power amplifiers — dynamics control, equalization,
crossovers, delays and signal routing—into a single compact and powerful
unit. The DP-0206 can be used for loudspeaker management, post-mix
processing, room-combining, stereo two, three and four-way crossover
with mono sum for subwoofers, driver and cluster alignment, full-range
zoning, signal routing, surround sound or any other application
requiring precise audio processing tools. Advanced users will especially
appreciate the wide variety and quantity of multi-band filtering
including parametric, all-pass, notch, high/low pass/shelving, CD horn
EQ—any combination of twelve filters on each input and each output.
All processing configurations and parameters for up to thirty DP-0206
units are set with a PC and the intuitive new control
software. You can
configure systems off-line at the office, upload to the unit(s) at the
job-site, then disconnect the PC and recall different signal flow and
parameter settings from sixteen on-board memories. An innovative and
time-saving measurement data import function allows audio professionals
to tune crossovers and equalize measured speaker system response files
exported from SIA Smaart and Goldline TEF software. Comprehensive
hardware and software security features such as front panel lock and
multi-level password access protect system settings. An optional remote
control module allows simple contact-closure activation of memory
recall, output volume control and output muting. The DP-0206 is backed
with a five-year warranty.
TOA CLEAR CONVERSION TECHNOLOGY
Those familiar with DSP will agree that the method of converting the
analog input signal to the digital domain (A/D conversion) is one of the
keys to producing great sound. TOA’s newly developed CLEAR* Conversion
technology routes low level input signals below a specific threshold
through a separate gain stage and a second, separate A/D path. This
minimizes unwanted noise (quantization error) produced using
conventional, single A/D conversion methods. TOA’s CLEAR Conversion
(Pat. Pending) features ultra-smooth cross-fade switching between the
two A/D signal paths resulting in greater than 110 dB dynamic range,
significantly lower noise and most importantly – clear, transparent,
natural-sounding audio.
*Cross-Linked Exact A/D Resolution
|
DP-0206
