HOMEOur ProductsAmplifiers9000M29000M2 Modules
Products Lineup
Audio System
Amplifiers
Voice Evacuation Systems
PA Speakers
Pro-Audio Speakers
Wired Microphones
Wireless Microphones
Conference System
Network Audio Adapters
Intercom System
Megaphones
Program Timer
Mixers
Audio Signal Processors
Impedance Meter
Data Library

Here, TOA's Data Library equipped with a search engine offers its CAD drawings made out in pdf and dwg forms, EASE data, specification sheets, brochures, instruction and installation manuals, and a wealth of other product data for your downloading.

9000M2 Modules

Please see the 9000M2 Series installation manual or GUI software for details on valid module combinations when installing modules.


9000M2 Series modules are not compatible with module ports in existing 900 Series, 700 Series or BG-M Series mixer/amplifiers.


The recommended 900 Series Modules to be used with the 9000M2 Series products are: B-01, B-11, B-21, B-41, E-03, E-04, E-05, E-06, E-07, L-01, L-11, L-41, M-01, M-03, M-11, M-21, M-41, M-51, M-61, S-01, S-02, S-04, S-20S, T-01, T-02, T-12, U-01, U-03, U-11, U-12, U-13, U-14, U-21, U-43, U-61, V-01, ML-11T.


Note: The maximum number of S-20S modules supported by the 9000M2 Series main frame depends on the serial number. Units manufactured before and including 07H are limited to (2) two of the S-20S modules. Units manufactured after and including 07I are limited to (4) four of the S-20S modules.


Modules

C-001T

C-001T
Input/Output Control Module

Eight assignable control inputs for activating Event, Volume Up/Down (Input or Output), Mute (Input or Output), Power On/Off, Emergency Mute or Synch On/Off
Eight assignable control outputs for activating external relays
Removable Terminal Block
Maximum one per chassis

Specification CAD Photo

D-001R

D-001R
Dual Unbalanced Line Input Module with DSP

Two Unbalanced Line Inputs with Stereo Summing RCA jacks
Digital Signal Processing

  • 10-Band Parametric EQ
  • Bass / Treble
  • Loudness
  • High and Low Pass Filters
  • Compressor

Adjustable Sensitivity (nine levels, -60 to -10 dBV)
Maximum four per chassis
Required for VOX (Voice-Operated Switch) function and input level metering

Manual Specification CAD Photo

D-001T

D-001T
Dual Mic/Line Input Module with DSP

Two Balanced Mic / Line Inputs
Digital Signal Processing

  • 10-Band Parametric EQ
  • Bass / Treble
  • Loudness
  • High and Low Pass Filters
  • Compressor

Adjustable Sensitivity (nine levels, -60 to -10 dBV)
Phantom Power (24 VDC)
Removable Terminal Block
Maximum four per chassis
Required for VOX (Voice-Operated Switch) function and input level metering

Specification CAD Photo

T-001T

T-001T
Dual Line Output Expansion Module with DSP

Two Balanced Line Outputs
Digital Signal Processing

  • 10-Band Parametric EQ
  • Bass / Treble
  • Loudness
  • High and Low Pass Filters
  • Compressor
  • TOA speaker EQ presets

Removable Terminal Block
Maximum three per chassis

Specification CAD Photo

AN-001T

AN-001T
Ambient Noise Controller Module

Automatically adjusts output gain to compensate for changes in ambient noise level
Each input can be assigned to control a specific output
Two inputs with +24VDC phantom power for condenser mics
14 preset gain ratios
Accessory sensing microphone available, model AN-9001
Maximum two per chassis

Specification CAD Photo

RC-001T

RC-00iT
RS-485 Control Module

Allows use of up to 16 RS-485 remote control panels
Bi-directioncal RS-485 communication provides control and status feedback display for each remote function
Dual ports allows independent home runs for up to 8 modules each
24 VDC power adapter (optional AD-246) required for each port used
May be used in any control option slot on 9000M2 frame and even in addition to a C-001T when spare slots are available
Maximum one per chassis

Specification CAD

ZP-001T

ZP-001T
Telephone Zone Paging Module

Telephone Access Paging to up to eight zones
Uses DTMF dialing to access amplifier and/or line outputs
Dial up to eight output zones in one operation
Analog extension or page port compatible
Page port operation requires contact closure activation
RJ-11 Telephone Jack and Removable Terminal Blocks
Maximum one per chassis

Specification CAD Photo
Top of the Page