Skip to main content

N-8610RM

  • n8610rm_pn1j.jpg
n8610rm_pn1j.jpg

IP Remote Microphone

N-8610RM

The N-8610RM is an IP remote microphone that employs packet audio technology. High-quality voice output to intercom stations connected to the IP intercom exchange or Multi-Interface Unit and to other N-8610RM units can be achieved by simply connecting the remote microphone to a LAN or WAN network. The N-8610RM features a full range of remote microphone operating capability, and is equipped with 14 function keys, including one under a cover, each with its own indicator. Functions can be assigned individually to these keys. The number of function keys and indicators can be increased to up to 40 in blocks of 10 with the addition of up to 4 RM-210 Extension Units. Power can be supplied to the microphone using a PoE-compatible switching hub, eliminating the need for the N-8610RM's optional AC adapter. The N-8610RM can also be wall-mounted with the additional use of the optional WB-RM200 Wall-Mounting Bracket.

  • Communication function
  • 14 function keys
  • Functions can be assigned individually
  • Connection to SX-2000 System via LAN or switching hub and SX-200IP
  • Up to 4 RM-210 Key Extension Units can be connected
  • PoE
  • Status LED
  • Communication function
QTY
▼
* 0 dB = 1 V
Power Source
Power supply device that complies with IEEE802.3af standard or
12 V DC (use of the optional AC adapter)
Power Consumption
Use of the AC adapter (12 V DC): 4 W (microphone only), 8.5 W (when connecting 4 RM-210 Extension units)
Use of the PoE (48 V DC): 5.2 W (microphone only), 7.5 W (when connecting 2 RM-210 Extension units)
Speech Method
Hands-free conversation (use of goose-neck microphone)
Audio Frequency Range
300 Hz - 7 kHz
Microphone
Unidirectional electret condenser microphone
Built-in Speaker
6.6 cm (2.6) cone-type
Network Section
Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio packet transmission system: Unicast, Multicast
Number of paging destinations: Unicast (max. 16), Multicast (max. 191)
Connector: LAN: RJ45 connector (PoE compatible)
Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software)
Quantifying bit number: 16 bits
Voice encoding method: Sub-band ADPCM, Cryptosystem
Voice packet loss recovery: Silence insertion
Audio delay time: 80 ms, 320 ms (controllable on the software)
Number of Connectable Expansion
Max. 4 units (maximum 2 units at PoE power supply)
User Control
Function keys (including a covered key), talk key
Indication
Power indicator, Status indicator, Selection indicator, Broadcast status indicator, Microphone indicator
Installation Method
Desk/Surface mounted master station
(When mounting to the wall, use the optional WB-RM200.)
Operating Temperature
0 ℃ to +40 ℃ (32 ℉ to 104 ℉)
Operating Humidity
90 %RH or less (no condensation)
Finish
ABS resin, blueish gray
Dimensions
190 (W) x 76.5 (H) x 215 (D) mm (7.48" x 3.01" x 8.46") (excluding microphone)
Weight
700 g (1.54 lb)
Included Accessories
CD (for PC setting, maintenance use) …1, Ferrite clamp (for power supply cable, LAN cable, and extension unit cable) …1 each
Optional Accessories
Remote microphone extension: RM-210

Please download Datasheet to access full specifications.

Optional Accessory

IP remote microphone that employs packet audio technology.
High-quality voice output to intercom stations connected to the IP intercom exchange or Multi-Interface Unit and to other The unit shall be achieved by simply connecting the remote microphone to a LAN or WAN network. The IP Remote Microphone shall feature a full range of remote microphone operating capability, and be equipped with 14 function keys, including one under a cover, each with its own indicator. Functions shall be assigned individually to these keys. The number of function keys and indicators shall be increased to up to 40 in blocks of 10 with the addition of up to 4 RM-210 Extension Units. Power shall be supplied to the microhone using a PoE-compatible switching hub, eliminating the need for the dedicated optional AC adapter. It shall be wall-mounted with the additional use of the optional Wall-Mounting Bracket.

  • n8610rm_pn1j.jpg
n8610rm_pn1j.jpg

Need other technical materials like software? Please visit Download Center.
*Sign-in or membership registration is required.

Get Your Quote.

sns share

close

  • facebook
  • twitter
  • LinkedIn