P-924MK2 UL

Power Amplifier

P-924MK2 UL

The P-924MK2 Power Amplifier delivers up to 240 watts (Direct)/220 watts (Transformer) of output power.The power amplifier has an input port to accept one plug-in module.

Specifications Equipment Downloads

Type

Power amplifier

Power Source

AC mains, 120 V, 60 Hz

Power Consumption

120 V /3 A

Output Power

(D) 240 W RMS
(T) 220 W RMS

Power Bandwidth

(D) 20 - 20,000 Hz, 0.5 % THD
(T) 50 - 20,000 Hz, 0.5 % THD

Frequency Response

(D) 20 - 20,000 Hz, ±1 dB
(T) 20 - 15,000 Hz, ±1 dB, (T) 20 - 20,000 Hz, +1 dB, -3 dB

Total Harmonic Distortion

0.01 % at 1 kHz, rated output

Input

One Input Port: Port accepts any input module exept T-01.
One Direct Input
*Use of direct input prohibits use of modular input port.

Input Sensitivity/Impedance

Input Port: 100 mV or 1000 mV (switchable)/10 kΩ
Direct Input: 100 mV or 1000 mV (switchable)/10 kΩ

Outputs (T)=Transformer, (D)=Direct

Main (T): 8 Ω, 25 and 70 volts, balanced
Main (D): 4 Ω, unbalanced

Output Regulation (1kHz)

(D) Less than 0.5 dB, no load to full load
(T) Less than 1.0 dB, no load to full load

Signal to Noise Ratio

Input level switch in 0 dBV (1000 mV) position: 108 dB
Input level switch in -20 dBV (100 mV) position: 90 dB

Control

1 Input gain control 1 Input level switch
1 Power ON/OFF switch 1 Low-Cut switch

Indicator

1 Power LED, 1 Protect LED, 1 Signal LED, 1 Normal LED, 1 Peak LED

Protection

Self-protection, with 2AC fuses and 2DC fuses (inside)

Connector

Input: Card-edge connector and screw-terminal strip
Output: Screw-terminal strip
AC outlet: 3-pin grounding type
AC power cord/plug: SJT, 3-prong type

Operating Temperature

-10 °C to +60°C (12 °F to 140 °F)

Finish

Black

Dimensions

420 (W) x 151.3 (H) x 334.2 (D) mm

Weight

19.5 kg

Included Accessories

Volume control cover (YA-920)……1

Optional Accessories

Rack mounting bracket (MB-35B)