Power Source
20 – 33 V DC, removable terminal block (2 pins)
Current Consumption
0.33 A at 33 V DC input, 0.35 A at 24 V DC input
LAN A, B
Number of Connectors: 2 (LAN A, LAN B)
Network I/F: 100BASE-TX
Network Protocol: TCP, UDP, ARP, ICMP, RTP, IGMP, HTTP
Spanning Tree Protocol: RSTP
Audio Transmission System: TOA Packet Audio (*1)
Audio Encoding Method: PCM
Audio Sampling Frequency: 48 kHz
Audio Quantifying Bit Number: 16 bits
Connection Device: VX-3004F, VX-3008F, VX-3016F, NX-300, VX-3000CT, VX-3000PM, Switching HUB
Connector: RJ45 connector
Connection Cable: Category 5 twisted pair cable (CAT5) or greater
Maximum Cable distance: 100 m
Audio Input
8 inputs
Input Level:
Input 1 - 4: -60 dBV / -40 dBV / -20 dBV /0 dBV selectable, input impedance 600 Ω, transformerbalanced
Input 5, 6: -20 dBV, input impedance 10 kΩ, unbalanced
Input 7, 8: 0 dBV, input impedance 10 kΩ, unbalanced
Frequency Response: -60 dBV): 200 Hz - 10 kHz, -2 dB ±3 dB
-40 dBV / -20 dBV / 0dBV: 100 Hz - 15 kHz, -2 dB ±3 dB
Distortion: 1% or less
Signal to Noise Ratio: 60 dB or more
Removable terminal block (6 pins x 2, 4 pins x 2)
Only Input 1 is used in common with the front-mounted ø6.3 mm phone jack
Control Input
20 channels, no-voltage make contact input, open voltage: 30 V DC, short-circuit current: 2 -10 mA
Connector: Removable terminal block (10 pins x 2, 12 pins x 2)
Control Output
Channels 1 - 5, relay (a contact), withstand voltage: 30 V DC, control current: 1 A
Channels 6 - 10, open collector output (polarized), withstand voltage: 30 V DC control current 100 mA
Connector: Removable terminal block (10 pins) x 2
Indicators
Signal Indicator (Green) x 8, Run (Green) x 1, LINK/ACT (Green) x 2
Volume Control
8 channels
Operation
Input level setting switch x 1, IP address setting switch x 1
Dimensions
482 x 44 x 292.4 mm
