WM-D5300 -H1
Beltpack Transmitter
WM-D5300 -H1
The WM-D5300 is a digital wireless transmitter to be used with the optional microphones, exclusively for speech applications. The transmitter is specially designed to be used in conjunction with TOA's WT-D5800 digital wireless receiver.
- Ultra slim and lightweight body
- 1 AA battery provides up to 8 h of continuous use
- Selectable microphone sensitivity
- Selectable transmission output (1 mW/10 mW)
- 3-step battery life indicator
Frequency Range
576 - 606 MHz
Channel Selection
160 channels (The number of channels may differ from country to country)
RF Carrier Power
Less than 50 mW
Modulation Type
FSK
Maximum Input Level
–18 dB* (Sensitivity: L)/–28 dB* (Sensitivity: H)
Audio Frequency Response
100 Hz – 12 kHz
ID Selection
10 patterns
Battery
WB-2000 rechargeable battery (option) or AA Alkaline dry cell battery
Battery Life
Approx. 8 hours
Antenna
Lamda/4 whip antenna
Operating Temperature
–10 °C to +50 °C (14 °F to 122 °F) (except battery)
Operating Humidity
30 to 85 %RH (no condensation)
Finish
Body: ABS resin, black, paint
Dimensions
62 (W) × 185 (H) × 19 (D) mm (2.44" × 7.28" × 0.75")
Weight
90 g (0.2 lb) (with battery)
Included Accessories
Storage case x 1, Screw driver (for setting) x 1
Optional Accessories
Battery charger: BC-2000 or BC-2000A
Ni-MH battery: WB-2000-2 (containing 2 pieces)
Unidirectional lavalier microphone: YP-M5300
Omnidirectional lavalier microphone: YP-M5310
Headset microphone: WH-4000A, WH-4000H
Ni-MH battery: WB-2000-2 (containing 2 pieces)
Unidirectional lavalier microphone: YP-M5300
Omnidirectional lavalier microphone: YP-M5310
Headset microphone: WH-4000A, WH-4000H
(*1) 0 dB = 1V
Notes: The WM-D5300 cannot communicate with the TRANTEC Wireless System (S4 and S5 series).
The WM-D5300 cannot communicate with the TOA Analog Wireless System (WT-5800, WT-5805, and WT-5810 etc.)
Notes: The WM-D5300 cannot communicate with the TRANTEC Wireless System (S4 and S5 series).
The WM-D5300 cannot communicate with the TOA Analog Wireless System (WT-5800, WT-5805, and WT-5810 etc.)
Please download Datasheet to access full specifications.
"The digital wireless beltpack transmitter shall operate in the UHF band between 576 MHz – 606 MHz using the digital true diversity principle to improve reception allowing up to 32 channels of simultaneous broadcast.
The transmitter is to be used with optional microphones, exclusively for speech applications. Audio bandwidth shall be between 100 Hz to 12 kHz and power transmission shall not exceed 50 milliwatts.
The transmitter shall be able to continually operate up to 8 hours on a single AA battery or a dedicated rechargeable battery. There shall be contacts at the base of the unit that will allow easy recharging of the internal rechargeable battery by using a dedicated charger.
The transmitter shall have a battery status tri-colour indicator lamp that illuminates from green to orange as battery consumption progresses and then finally red. Battery status will also be transmitted to the receiver.
The transmitter shall have an ON/OFF switch that is easily accessible on the exterior of the beltpack and by simply sliding the battery cover off reveals additional functions as follows: bank selection, channel selector, microphone sensitivity selector, encryption setting switch with status indicator, code setting control that prevents interference between channels sharing the same frequency (code setting is effective when the encryption function is not set).
The finish shall be black ABS resin measuring 62 (W) x 185 (H) x 19 (D) mm (2.44" x 7.28" x 0.75") and weighing 90 g (0.2 lb.) (with battery).
Associated products: WT-D5800 digital wireless receiver. WM-D5200 digital wireless microphone manufactured by TOA Corporation
Optional extras: YP-M5300 unidirectional lavalier microphone. YP-M5310 omnidirectional lavalier microphone. WH-4000A and WH-4000H headset microphones. BC-2000 or BC-2000A battery charger. WB-2000-2 rechargeable battery (pair) manufactured by TOA Corporation.
Manufacturer: TOA Corporation
Model: WM-D5300 -H1
Please sign in to access further technical materials such as software, firmware or EASE files.
Get Your Quote.
