Antenna for Wall-/Ceiling Mounting
The wireless antenna YW-4500 has been designed for UHF band wireless system. Cable loss can be compensated for by a built-in RF signal booster. The YW-4500 in a dipole antenna designed to be installed in doors. Use the coaxial cable with 75Ω impedance. *When ordering the YW-4500, use with WM-5xxx, WT-5xxx, WTU-4800 with the suffix H01 US, or Trantec S5.3 products
- Omnidirectional dipole antenna for wall or ceiling mounting
- By means of the integrated RF amplifier losses induced by long cable runs can be compensated
Please download Datasheet to access full specifications.
The remote dipole antenna shall be suitable for use in the UHF frequency range of 550 - 932 MHz. The antenna gain shall be greater than 8 dB with a V. S. W. R. of less than 3. The output impedance shall be 75 ohm with an operating distance of 35 m (115 ft.) maximum using RG-6U cable or 50 m (164 ft.) maximum using RG-11U cable. The antenna power requirement shall be 7- 12 VDC with current consumption of less than 24 mA supplied from the wireless receiver or antenna distributor. The unit shall have a mounting hole pitch of 3.29" (83.5 mm). The operating temperature shall be -10° C to +50° C (+14° F to +122° F). Unit construction shall be AES resin, off-white with dimensions of 105 x 140 x 126 mm (4.13” x 5.51” x 4.96”) and weight of 300 g (0.66 lbs.).
Need other technical materials like software? Please visit Download Center.
*Sign-in or membership registration is required.
Get Your Quote.