Digital Wireless Receiver

Digital Wireless Receiver

Digital Wireless Receiver

WT-D5800

The WT-D5800 is a PLL-synthesizer controlled double super-heterodyne diversity receiver designed to be used with a UHF wireless system. Employing a digital reception system that is virtually immune to interference and noise, the WT-D5800 Wireless Receiver ensures stable radio signal reception.

Additionally, this receiver features a host of convenient functions, such as external equipment controls by way of contract outputs, and system status monitoring by way of its maintenance software, enabling highly reliable operation.


D5000 Cookbook
D5000 Maintenance Software


Power Source AC mains (supplied AC adapter must be used)
Current Consumption 350 mA (13.5 V)
Frequency Range H1 ver.: 576 - 606 MHz
Channel Selectable 160 selectable frequencies
Receiving System Double super-heterodyne
Diversity system Space diversity (digital diversity)
Mixing Output MIC/LINE (selectable): -60 dB (*1) (MIC)/-20 dB (*1) (LINE), 600 Ω phone jack (unbalanced), 600 Ω XLR-3-32 type connector (balanced)
Mixing Input -20 dB (*1), 10 kΩ, unbalanced, phone jack
Antenna Input 75 Ω, BNC (phantom powering for antenna), 9 V DC, 30 mA (max)
Antenna Output 75 Ω, BNC (Gain 0 dB)
Contact Output 1 channel, no-voltage make contact output, withstand voltage: 30 V DC, control current 0.5 A max, terminal block (2pins)
Receiving Sensitivity 24 dBμV or less (Bit error rate:1E-5 or less)
Antenna Input Attenuator 0 dB/-10 dB switchable
Indicator Audio (5 steps), RF (5 steps), ANT A/B, Audio (peak), Battery alarm
Frequency Response 50 Hz - 12 kHz
Total Harmonic Distortion 0.5 % or less
Function Frequencies scanning, Feedback suppressor, Equalizer (optimizing each compatible microphone)
ID Selectable 10 patterns
Operating Temperature -10 ℃ to +50 ℃ (14 ゜F to 122 ゜F)
Operating Humidity 30 % to 85 %RH (no condensation)
Finish Resin, black
Dimensions 210 (W) x 44 (H) x 211.9 (D) mm (8.27 in x 1.73 in x 8.34 in)
Weight 730 g (1.61 lb)
Accessory AC adapter (*2) …1, Whip antenna …2, Rubber foot …4
Option Rack mounting bracket kit: MB-WT3 (for rack mounting one WT-D5800 unit), MB-WT4 (for rack mounting two WT-D5800 units)

Scroll to top