IP-A1 Series

IP Audio Interface

IP-A1AF

The IP-A1AF is a PoE-powered Audio Interface that decodes IP audio streams into analog audio signals. It is equipped with a built-in 15 W amplifier to drive low-impedance speaker(s) and internal storage, onto which can store up to 20 audio files. Analog audio and control outputs can also be connected to an external amplifier. It supports SIP protocol for integrations with VoIP devices, and its 20 multicast ports are available for group paging operations. It can also receive broadcasts from Video Management Systems via ONVIF backchannel. Device control and further system integration is accessed through remote API (HTTP) or local control inputs.

LEARN MORE about the IP-A1 Series and what it can do - ask your rep about registering for our Introduction Course

IP Paging Gateway

IP-A1PG

The IP-A1PG is a PoE-powered Gateway Unit that integrates multiple IP Audio devices by converting the SIP voice or ONVIF Backchannel audio into multicast audio streaming. It can also transmit built-in sound source or input audio as multicast audio streaming. Moreover, the event broadcasting triggered by control input or remote API (HTTP) as well as the command set that sends multiple HTTP commands simultaneously are also available.

LEARN MORE about the IP-A1 Series and what it can do - ask your rep about registering for our Introduction Course

IP Ceiling Speaker 8W

IP-A1PC238

The IP-A1PC238 is a PoE-powered Ceiling Speaker with a built-in 8 W amplifier and internal data storage for up to 20 audio files. It supports SIP protocol for flexible integrations with VoIP devices, and its 20 multicast ports are available for group paging operations. It can also receive broadcasts from Video Management System via ONVIF audio backchannel. Device control and further system integration is accessed through remote API (HTTP) or local control inputs.

LEARN MORE about the IP-A1 Series and what it can do - ask your rep about registering for our Introduction Course

IP Ceiling Mount Speaker 8W

IP-A1PC580R

The IP-A1PC580R is a PoE-powered Ceiling Speaker with a built-in 8W amplifier and internal data storage for up to 20 audio files. It supports SIP protocol for flexible integrations with VoIP devices, and its 20 multicast ports are available for group paging operations. It can also receive broadcasts from Video Management System via ONVIF audio backchannel. Device control and further system integration is accessed through remote API (HTTP) or local control inputs.

LEARN MORE about the IP-A1 Series and what it can do - ask your rep about registering for our Introduction Course

IP Square Speaker 8W

IP-A1PC580S

The IP-A1PC580S is a PoE-powered Surface mount Speaker with a built-in 8W amplifier and internal data storage for up to 20 audio files. It supports SIP protocol for flexible integrations with VoIP devices, and its 20 multicast ports are available for group paging operations. It can also receive broadcasts from Video Management System via ONVIF audio backchannel. Device control and further system integration is accessed through remote API (HTTP) or local control inputs.

LEARN MORE about the IP-A1 Series and what it can do - ask your rep about registering for our Introduction Course

IP Paging Horn Speaker

IP-A1SC15

The IP-A1SC15 connects to your VMS network with a single LAN cable and can be assigned an IP address - allowing you to combine video and audio systems. Respond immediately to emergency situations with live announcements or prerecorded messages with one of four different audio broadcasting modes (SIP Direct Call, Multicast Streaming, VMS Broadcast and Remote API). This allows the broadcast to be prioritized right away - overriding any other current announcement.

Additionally, the IP Setting Tool allows you to assign IP addresses to all IP Horn Speakers during set-up. Once you establish both the network and host ID for one speaker, all others will automatically assign IP addresses for the remaining devices. Finalize each IP horn speaker to its optimal sound by adjusting settings dependent upon height, distance and speaker environment.

Grant access for API control protocols and the IP Setting Tool HERE.

LEARN MORE about the IP-A1 Series and what it can do - ask your rep about registering for our Introduction Course

_{Firmware v1.6.0 available}
_{*Once updated, cannot be downgraded back to earlier firmware.}