SX-2000 Series Audio Management System

SX-2000 Series Audio Management System

SX-2000SM System Manager

SX-2000SM System Manager

SX-2000SM (While Supplies Last)

Introducing a scalable new system for configuring versatile and highly effective PA applications. The SX-2000 Series features new matrixing capabilities, so a single system can have its components distributed in different locations, yet under centralized control. Ideal for large-scale installations ranging over multiple buildings as well as local systems, the versatile SX-2000 Series is particularly well-suited for airports and railway stations, factories, shopping malls and large offices. Versatility is ensured by such features as a dual power source and redundant backups for fail-safe operation, making it a cost-effective solution for virtually any installation, and without long lead times or the expense of a custom system. A fireman's microphone feature is also included, for enhanced effectiveness in an emergency. SX-2000 Series components enable creation of an ideal system for all sorts of application requirements.

The SX-2000SM System Manager is designed for use in TOA's Matrix System and can be mounted in an EIA Standard component rack (1-unit size). It can be used in combination with an optional audio input unit audio output unit and remote microphone of the SX-2000 Series to make up a complete matrix system and can perform audio signal routing and priority control for the entire system. The SX-2000SM itself is equipped with 8 control inputs, 8 control outputs, failure status outputs, failure data inputs/switches, access indicators, mode indicators and failure indicators enabling a wide range of controls and status monitoring. Control input line failure can be detected by connecting resistors to its line. The SX-2000SM has a function to supply a stabilized 24 V DC. Each control can be performed by way of a CF card inserted into the SX-2000SM unit. Operations of the entire system can be recorded and their contents stored on a CF card as an operation log. The SX-2000SM also features two power inputs making possible the creation of a dual-redundant power system. Equipped with two channels of interfaces for connecting to the Emergency Power Supply units, making it possible to configure the system to operate during a power failure.

Read documentation first before installing and operating.

SX-2000CO Control Output Unit

SX-2000CO Control Output Unit

SX-2000CO (While Supplies Last)

The SX-2000CO is a control output of the matrix system and can be mounted in an EIA equipment rack (1 U size). Multiple units can be decentralized in a whole system. It is equipped with 32 control output channels. The indicators on the front panel monitor the control output line status. Control output status when the CPU turns off can be set. The SX-2000CO has two power inputs and can support a dual-redundant power supply system. By using a stand-alone mode, system can be configured with only the SX-2000CO, SX-2000CI Control input unit and the power supply unit, permitting the contact data of multiple channels to be transmitted to the remote locations with simple wiring.

SX-2100AI Audio Input Unit

SX-2100AI Audio Input Unit

SX-2100AI (While Supplies Last)

The SX-2100AI is an audio input of the matrix system and can be mounted in an EIA equipment rack (2U size). Multiple units can be decentralized in a whole system. It features modular construction that allows it to handle from two to eight inputs per unit. Audio signals are transmitted digitally to the audio output unit, but an analog audio output function (1 channel) enables simultaneous all-zone calls for use in emergency situations. Audio input levels are indicated on the level meters provided for each input channel. Volumes can be adjusted for each channel using the volume controls on the front panel or the SX-2000 software. The volume controls can be locked. Any input channel can be monitored using the internal speaker. It is also equipped with 16 control inputs, and 16 control outputs. It is equipped with two power inputs, allowing for a redundant power system.

SX-2100AO Audio Output Unit

SX-2100AO Audio Output Unit

SX-2100AO (While Supplies Last)

The SX-2100AO is an audio output of the matrix system and can be mounted in an EIA equipment rack (2 U size). Multiple units can be decentralized in a whole system. It is equipped with eight audio outputs, and two inputs can be mixed and output. It is also equipped with eight control inputs, and eight control outputs. The SX-2100AO receives audio signals from the audio input unit via digital transmission, but an analog audio input function (1 channel) enables simultaneous all-zone calls for use in emergency situations. Audio output levels are indicated on the level meters provided for each output channel. Volumes can be adjusted for each channel using the volume controls on the front panel or the SX-2000 software. The volume controls can be locked. Any output channel can be monitored using the internal speaker. Two channels of local audio inputs with control inputs are provided as the dedicated audio inputs. Its functions include an amplifier switching function that automatically switches the power amplifier to the standby amplifier if the power amplifier fails, and a surveillance function that self-diagnoses the speaker lines. Equipped with two channels of interfaces for connecting to the Emergency Power Supply units, making it possible to configure the system to operate during a power failure. One control IN/OUT interface allows the number of control inputs and outputs to be increased. The SX-2100AO has two power inputs and can support a dual-redundant power supply system.

SX-2000AO Audio Output Unit

SX-2000AO Audio Output Unit

SX-2000AO (While Supplies Last)

The SX-2000AO is an audio output of the matrix system and can be mounted in an EIA equipment rack (2U size). Multiple units can be decentralized in a whole system. It is equipped with eight audio outputs, and two inputs can be mixed and output. It is also equipped with eight control inputs, and eight control outputs. The SX-2000AO receives audio signals from the audio input unit via digital transmission, but an analog audio input function (1 channel) enables simultaneous all-zone calls for use in emergency situations. Audio output levels are indicated on the level meters provided for each output channel. Volumes can be adjusted for each channel using the volume controls on the front panel or the SX-2000 software. The volume controls can be locked. Any output channel can be monitored using the internal speaker. One control IN/OUT interface allows the number of control inputs and outputs to be increased. It is equipped with an emergency audio input and a 24 V emergency cutoff input. The SX-2000AO has two power inputs and can support a dual-redundant power supply system.

SX-2000CI Control Input Unit

SX-2000CI Control Input Unit

SX-2000CI (While Supplies Last)

The SX-2000CI is a control input of the matrix system and can be mounted in an EIA equipment rack (1 U size). Multiple units can be decentralized in a whole system. It is equipped with 32 control input channels. Control input line failure can be detected by connecting resistors to its line. The indicators on the front panel monitor the control input line status. The SX-2000CI has a function to supply a stabilized 24 V DC. The SX-2000CI has two power inputs and can support a dual-redundant power supply system. By using a stand-alone mode, system can be configured with only the SX-2000CI, SX-2000CO Control output unit and the power supply unit, permitting the contact data of multiple channels to be transmitted to the remote locations with simple wiring.

SX-200RM Remote Microphone Interface Module

SX-200RM Remote Microphone Interface Module

SX-200RM (While Supplies Last)

The SX-200RM is a dedicated remote microphone module for the SX-2000 Series audio input unit and can be used to connect two remote microphones. Input sensitivity can be adjusted using the knobs located near the RJ45 connector.

Mic/Line Input Module (24-bit A/D)

Mic/Line Input Module (24-bit A/D)

D-921E

The D-921E is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors. Input sensitivity and phantom power setting can be performed at the main frame such as the D-901.

Mic/Line Input Module (24-bit A/D)

Mic/Line Input Module (24-bit A/D)

D-921F

The D-921F is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors. Input sensitivity and phantom power setting can be performed at the main frame such as the D-901.

Mic/Line Input Module

Mic/Line Input Module

D-922E

The D-922E is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors. The D-901's 4-pole DIP switch is used to set the input sensitivity, phantom power supply, and ground lifting.

Mic/Line Input Module

Mic/Line Input Module

D-922F

The D-922F is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors. The D-901's 4-pole DIP switch is used to set the input sensitivity, phantom power supply, and ground lifting.

Stereo Input Module

Stereo Input Module

D-936R

The D-936R is a 4 stereo input module designed for use with the D-901 Digital Mixer, etc. It is equipped with standard RCA pin jacks. The D-936R features two stereo transmission modes: 1)Selection of one of the four stereo inputs for transmission to the D-901. 2)Mixing of all four stereo inputs, transmitting the mixed signal to the D-901 through left/right channel outputs. Mode settings and stereo selection are performed at the main frame such as the D-901.

Terminal Unit

Terminal Unit

RM-200RJ

The RM-200RJ is designed to convert the RJ45 connector into a screw terminal block. It is used to connect between a trunk cable (such as CPEV cable) and a feeder cable (such as LAN cable) in wiring a remote microphone. The built-in indicator shows the voltage status of DC power cable when the remote microphone cable for the SX-2000 series system is connected.

Remote Microphone

Remote Microphone

RM-200SA (While Supplies Last)

The RM-200SA is a remote microphone designed for the Matrix System. It is equipped with 13 function switches that can be used to select individual zones or zone groups a covered switch and corresponding indicators. The optional RM-210 Remote Microphone Extension permits switches and indications to be expanded in 10-piece units.

Fireman's Microphone

Fireman's Microphone

RM-200SF

The RM-200SF is a Fireman's Microphone of the matrix system. It is equipped with an Emergency key, permitting it to be used as a remote microphone for emergency broadcast. Zone selection and microphone announcement can be made at the time of emergency broadcast. It offers a surveillance function to detect failures including microphone element failure. The RM-200SF has three function keys that can be set as individual or group selection keys, and each key is linked with the corresponding two indicators. Connecting the optional RM-210 Extension units to the RM-200SF expands the number of function keys and indicators in blocks of ten.

VP series Power Amplifier - 4ch x 60W

VP series Power Amplifier - 4ch x 60W

VP-2064

The VP-2064 Power Amplifier features a 60 W-by-4 channels configuration, and uses the VP-200VX Power Amplifier Module per channel.

VP series Power Amplifier - 2ch x 120W

VP series Power Amplifier - 2ch x 120W

VP-2122

The VP-2122 Power Amplifier features a 120 W-by-2 channels configuration, and uses the VP-200VX Power Amplifier Module per channel.

VP series Power Amplifier - 1ch x 240W

VP series Power Amplifier - 1ch x 240W

VP-2241

The VP-2241 Power Amplifier features a 240 W-by-1 channels configuration, and uses the VP-200VX Power Amplifier Module per channel.

VP series Power Amplifier - 1ch x 420W

VP series Power Amplifier - 1ch x 420W

VP-2421

The VP-2421 Power Amplifier features a 420 W-by-1 channels configuration, and uses the VP-200VX Power Amplifier Module per channel.

Power Amplifier Input Module

Power Amplifier Input Module

VP-200VX

The VP-200VX Power Amplifier Input Module is designed to be used in conjunction with the VP-2241 power amplifier.

IP Interface Module

IP Interface Module

SX-200IP (While Supplies Last)

Installed in the SX-2100AI Audio input unit of the SX-2000 series and connected to a network (LAN or WAN), the SX-200IP allows paging announcements to be made to the SX-2000 system from the N-8000 series' station(s) (N-8600MS and N-8610RM) employing the packet audio technology.

Remote Microphone Station

Remote Microphone Station

N-8610RM

The N-8610RM Remote Master Station is an IP remote microphone station that employs packet audio technology. High quality voice output is broadcast to N-8000 intercom door and master stations or to paging amplifiers using one of the IP to analog audio outputs available on the N-8000AF, N-8000MI or N-8000EX. 14 pre-programmed buttons provide access to stations, paging zones, one-touch dialing, 10-key and Function key. The N-8610RM may be expanded to 54 buttons using multiple RM-210 Extensions. The N-8610RM may be powered by PoE or an optional AD-1215 power supply. When using PoE with RM-210s, make sure that the available PoE can accommodate a minimum of 7.5 W on one port.

IP Master Station

IP Master Station

N-8600MS

The N-8600MS is the IP Master Station for the N-8000 system. The LCD screen shows incoming calls which may be selected at random (Selective Mode) or in the order received (Sequential Mode). Calls may be initiated based on previous connection (last 10 conversations). 3-party conference calls may be initiated from this master station. Bell schedule changes may be initiated or suspended from this master station. Speaker volume is adjustable at the station as well as in software. Hands free conversations with Full and 1/2 Duplex stations as well as PTT mode. Pages and station calls may be quickly redialed using the Redial key. Automatic connection or continuous call reception. Speed dialing, Dial Pattern, and One-touch dialing are available. Manual call transfers and Automatic call transfers (Group Hunting, Absence Transfer, Time Transfer) may be programmed using the keypad or the N-8000 Setting Software. Advanced functions may be password protected.  The N-8600MS is the only master station that can communicate with the SX-2000 system, using the SX-200IP input module on the SX system. Power by PoE or optional AD-1215P.

Scroll to top