9000M2 Modules

Ambient Noise Controller Module

Ambient Noise Controller Module

AN-001T

The AN-001T is a plug-in module of 2-channel ambient noise detector designed for use with the 9000 series amplifiers.
It automatically adjusts the output volume in response to the change of ambient noise level.

Contact I/O Expansion Module

Contact I/O Expansion Module

C-001T

The C-001T is a Control I/O expansion module designed for use with the 9000 Series amplifiers and can provide up to 8 channels each of input and output expansion. Since the main unit has 4 preinstalled inputs and outputs each, the control input and output can be expanded to up to 12 channels each when the C-001T is used. 

Dual Mic/Line Input Module with DSP

Dual Mic/Line Input Module with DSP

D-001T

The D-001T is a plug-in module designed for use with the 9000 Series amplifiers and can provide two independent balanced inputs. The D-001T can handle signals ranging from microphone level to line level by controlling their input sensitivity in 9 increments from -60 dB to -10 dB. Phantom power (+24 V) can be supplied for condenser microphone use. The D-001T can process effect for TONE/EQ/COMPRESSOR to two inputs independently. 

Dual Unbalanced Line Input Module with DSP

Dual Unbalanced Line Input Module with DSP

D-001R

The D-001R is a line input plug-in module designed for use with the 9000 Series amplifiers. It has 2-channel unbalanced inputs of RCA jacks. Input signals to both channels are mixed together. The D-001R can process effect for TONE/EQ/COMPRESSOR to two inputs independently.

Noise Masking Module

Noise Masking Module

NM-01

The NM-01 is a noise masking module to be used in conjunction with TOA’s 9000M2, 900, 800D, 700 and BG-2000 series amplifiers. This module generates a noise source to be used for sound masking and audio privacy applications. Such applications include open-plan office environments or smaller spaces where distracting or private conversations need to be made unintelligible. The module allows connection of optional external signal processing equipment (e.g. an equalizer), as required. A simple contact allows for muting of this noise source, if desired.

Dual Line Output Expansion Module with DSP

Dual Line Output Expansion Module with DSP

T-001T

The T-001T is a plug-in module designed for use with the 9000 Series amplifiers and can provide two independent balanced outputs. It can drive load of 600 Ω up to +16 dB. It can process effect for TONE/EQ/COMPRESSOR to two outputs independently.

RS-485 Remote Control Module

RS-485 Remote Control Module

RC-001TPS

The RC-001TPS comes with AC adaptor. It is an interface module to connect between the 9000M2 Series amplifier and the ZM-9011, ZM-9012, ZM-9013, or ZM-9014 Remote control panel of data communication type. Up to 16 remote control panels can be connected to the RC-001T.

Telephone Zone Paging Module

Telephone Zone Paging Module

ZP-001T

The ZP-001T is a Zone paging module designed for use with the 9000 Series amplifiers and functions as interface to connect the 9000 Series amplifier to an analog PABX, allowing zone paging to be initiated from the PABX. There are two operation modes: ring signal and paging port modes. Broadcast can be initiated regardless of operation mode.

AC Adapter

AC Adapter

AD-246

This is a compact switching AC adapter.

AC Adapter

AC Adapter

AD-1215P CU

The AD-1215P is a dedicated AC adapter to operate the Packet Intercom IP Stations on AC power and for SP-11N SIP module.

Scroll to top