IP Station

IP Master Station

IP Master Station

N-8600MS

The N-8600MS is the IP Master Station for the N-8000 system. The LCD screen shows incoming calls which may be selected at random (Selective Mode) or in the order received (Sequential Mode). Calls may be initiated based on previous connection (last 10 conversations). 3-party conference calls may be initiated from this master station. Bell schedule changes may be initiated or suspended from this master station. Speaker volume is adjustable at the station as well as in software. Hands free conversations with Full and 1/2 Duplex stations as well as PTT mode. Pages and station calls may be quickly redialed using the Redial key. Automatic connection or continuous call reception. Speed dialing, Dial Pattern, and One-touch dialing are available. Manual call transfers and Automatic call transfers (Group Hunting, Absence Transfer, Time Transfer) may be programmed using the keypad or the N-8000 Setting Software. Advanced functions may be password protected.  The N-8600MS is the only master station that can communicate with the SX-2000 system, using the SX-200IP input module on the SX system. Power by PoE or optional AD-1215P.

Remote Microphone Station

Remote Microphone Station

N-8610RM

The N-8610RM Remote Master Station is an IP remote microphone station that employs packet audio technology. High quality voice output is broadcast to N-8000 intercom door and master stations or to paging amplifiers using one of the IP to analog audio outputs available on the N-8000AF, N-8000MI or N-8000EX. 14 pre-programmed buttons provide access to stations, paging zones, one-touch dialing, 10-key and Function key. The N-8610RM may be expanded to 54 buttons using multiple RM-210 Extensions. The N-8610RM may be powered by PoE or an optional AD-1215 power supply. When using PoE with RM-210s, make sure that the available PoE can accommodate a minimum of 7.5 W on one port.

Remote Microphone Extension Unit

Remote Microphone Extension Unit

RM-210 S

Up to four remote microphones can be connected to the RM-200M Remote Microphone but the maximum connection length for all cables is approximately 800 meters. An external microphone input terminal is provided to allow using a headset microphone, along with built-in internal compressor circuitry to ensure broadcasts are always clear and distortion-free. The TALK button may be a PTT or lock-type, which also provides an "AUTO MIC Off" capability to automatically switch off the microphone if the TALK switch is inadvertently left on. The emergency activation button is equipped with a cover in case of accidental selection.

IP-65 Rated Outdoor Door Station

IP-65 Rated Outdoor Door Station

N-8640DS

The N-8640DS is an IP65, impact resistant IP door station with a separate microphone and speaker, allowing full duplex conversations with Master Stations. The N-8640DS is equipped with one control input and five control outputs (1 relay and 4 open collector) for integration with security or other 3rd party systems. An external speaker output provides .5W @8Ω. External or internal speaker priority is programmable. The N-8640DS may be powered by PoE (recommended).

IP Indoor Station

IP Indoor Station

N-8650DS

The N-8650DS is an indoor IP door station with a separate microphone and speaker, allowing full duplex conversations with Master Stations. The N-8650DS is equipped with one control input and five control outputs (1 relay and 4 open collector) for integration with security or other 3rd party systems. An external speaker output provides .5W @8Ω. External or internal speaker priority is programmable. The N-8650DS may be powered by PoE (recommended).

PCB Kit Version of IP-65 Rated Outdoor Door Station

PCB Kit Version of IP-65 Rated Outdoor Door Station

N-8640SB

The N-8640sb is an IP station kit that allows contractors to fabricate custom door stations. A rear cover and gasket are provided for outdoor applications. It provides full duplex audio to/from Master Stations. The N-8640sb is equipped with one control input and five control outputs (1 relay and 4 open collector) for integration with security or other 3rd party systems. An external speaker output provides .5W @8Ω. External or internal speaker priority is programmable. The -8640sb may be powered by PoE (recommended).

Scroll to top